- Forming ring that holds the sleeve concentric with the glove for best VHP coverage
- Forming ring also minimizes the glove intrusion into the isolator by folding the sleeve over
- “Hand” that spreads the fingers of the glove to optimize VHP coverage
- Bendable wrist that folds the hand over for extreme applications
- Customized to the applicable gloveport size and style
- Positive lock onto the gloveport
Download Presentation
System Description
The GS System is a glove support system that accurately positions the glove and sleeve assembly of the barrier isolator system during the Vapor Hydrogen Peroxide decontamination process.
The GS System positions the glove and the sleeve in such a way as to prevent any contact with adjacent surfaces and places the glove well into the isolator air strem.
The GS System addresses those isolator installations where the amount of space available in front of the gloveport is limited by machinery or devices. A stainless steel ring that is part of the glove support shapes the sleeve to form a cone around the glove and cuff. The resulting geometry minimizes the amount of intrusion of the glove into the isolator chamber.
The cuff is positioned concentrically to the sleeve and the glove is supported by a “hand” that features articulated fingers; these fingers can be spread to separate the glove fingers during gassing.
Features
- Positive lock of the GS System structure onto the gloveport’s internal diameter. Removal requires a deliberate action by the operator.
- Stainless steel ring, attached to the GS structure that precisely positions the sleeve concentric to the cuff/glove.
- Cuff ring attached on centering shaft that positions the cuff in the center of the assembly (optional).
- “Hand” with articulated fingers that positions and spreads the fingers of the glove during gassing (optional).
- Extension shaft that fully extends the glove/sleeve, applicable to those installations where clearances to internal machinery is not an issue (optional).
- Wrist joint, for those applications requiring minimal intrusion into the isolator volume (optional).
Specifications
- Type of gloveport/sleeve/cuff and glove: customized to the application.
- Installation distances: adjustable and set to the application.
Advantages & Applications
- The GS System permits precise placement of the glove/sleeve assembly without their full extension into the isolator.
- The GS System limits the intrusion distance of the glove into the isolator, relevant in those installations with limited clear space inside the isolator chamber.
- An optional jointed “wrist” permits bending the “hand” after its introduction into the glove. Applicable to those isolator applications where the proximity of internal components is extreme.
- Articulated “hand” permits spreading the fingers of the glove after support installation and prior to gassing.
Photo Gallery
Related Products
The system for rapid VHP decontamination of RTP canisters. Adaptable to interface with beta flanges and canisters of any size and manufacturer.
4 port glove tester. Simultanously test 4 gloves at a time. Color touchscreen operator interface with programmable mode of operation and parameters.